- Suitable for installation on rearview mirrors and side mirrors
- Product size: 7.5 x 6 x 5.5 cm (approx.)
1). Select the suitable position(Can sit in the driver's seat to adjust the installation position,inorder to see the front-wheel bland spot.try to install the review mirror on the right as much as possible)
2). Tear off the adhesive's protective film, stick it on the selected position(Please pay attention to the adjusted position and then press tight)
3). After pasted, you can adjust to any beam angle.
4). Press the outer mirror, and adjust to the suitable view.
5). According to the paste's character, please don't move, when washing the car, please do not aim the water gun at the mirror, otherwise, the mirror may fall off.
1). Focus on the front-wheel round mirror, since the rear mirror is adjustable, while the front wheel mirror cannot.so, please do the alignment of the front wheel when installing the mirror.
2). Tips: please install it at the position obstruct driving;
3). Before doing any installation, please clear the position where you are going to past, and keep in dry, in order to best fit.